Semi-Automatic Pipe/Bar Cutting Machine
|
|
|
JE-275 |
JE-315 |
Saw Angle |
90° |
45° |
90° |
45° |
Round Pipe |
Φ80mm |
Φ60mm |
Φ100mm |
Φ80mm |
Square Pipe |
60mm×60mm |
45mm×45mm |
90mm×90mm |
80mm×80mm |
Round Bar |
Φ38mm |
Φ25mm |
Φ55mm |
Φ45mm |
Square Bar |
38mm×38mm |
25mm×25mm |
50mm×50mm |
40mm×40mm |
|
60mm×60mm |
45mm×45mm |
90mm×90mm |
80mm×80mm |
|
60mm×80mm |
45mm×60mm |
80mm×90mm |
80mm×80mm |
|
|
Acute Features:
1. Fastest Cutting Method.
2. Burr Free cut.
3. Low noise.
4. No dust / pollution.
5. Auto Clamping, Cutting & manual Feeding.
6. With stock stop to set pipe length
7. Vertical cut and chamfer cut change freely (30°-90°).
8. Accurate angle (0.3° Variation).
9. Cooling and lubricate system ensures long run without fault, and prolongs the life of saws.
10. Feeding table can be installed.
11. Overload Protection
12. Cylinder re-adjustment facility. |
Additional specification:
Semiautomatic, cold saw machine, worm gear drive, manual feeding, and auto clamping- cooling - cutting machine.
|
|
|
Part Name/ Number |
Specification |
Feed (cutting) |
Driven by Hydro-Pneumatic Cylinder, which is powered by a pneumatic pressure up to 6 Bars. |
} |
Max Pneumatic pressure required is 8 kg/ cm2 |
Clamping |
Pneumatically Operated at Max pressure 7kg f/cm2. |
Feed Control |
(Hydraulic) through Manually Operated valve. |
Degree Cut Available |
45˚--90˚--30˚ |
Main Motor |
3 Phase induction Dual Speed Motor,
1425/2850 Rpm
2 / 2.5k.Watts
380 Volt, 50Hz. |
Gear Speed/ Blade Rpm |
60 / 120Rpm. |
Coolant Pump |
0.25 HP, 380Volt, 50Hz, 12Ltrs./min. |
PCB Board & Limit Switches |
By “CHNT” |
Pneumatic Solenoid valve |
“Southman” Make
Pressured 1.5 – 8 kgF/cm2. |
|
|
|
|
|